MIL-DTL-60585B (AR)
INCH-POUND
MIL-DTL-60585B(AR)
20 June, 2006
SUPERSEDING
MIL-C-60585A (MU)
31 AUGUST 1971
DETAILED SPECIFICATION
CASE, PROJECTILE BURSTER ASSEMBLY, M1E1
Reactivated after 20 June, 2006 and may be used for new and existing designs and
acquisitions.
This specification is approved for use by the U.S. Army ARDEC, and is available
for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements, examinations and tests for
the metal parts of the Case, Projectile Burster Assembly, M1E1.
2. APPLICABLE DOCUMENTS.
2.1 General. The documents listed in this section are needed to meet the
requirements specified in sections 3 and 4 of this specification. This section does not
include documents in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to assure the
completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Comments, suggestions, or questions on this document should be addressed to the
Commander, U.S. Army ARDEC, ATTN: AMSRD-AAR-AIS-SS, Picatinny, NJ 07806-
5000 or emailed to ardec-stdzn@pica.army.mil. Since contact information can change, you
may want to verify the currency of this address information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is
unlimited.
1
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business