INCH-POUND
MIL-DTL-70438A(AR)
8 September 2008
SUPERSEDING
MIL-P-70438(AR)
16 October 1984
DETAIL SPECIFICATION
Plug Assembly, Lifting, Universal
Inactive for new design after 21 August 1998
This specification is approved for use by the U.S. Army
Armament Research Development and Engineering Center
(ARDEC), and is available for use by all Departments and
Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers requirements for the
manufacturing and assembly of Universal Lifting Plugs for 155MM
projectiles (see 6.1).
Comments, suggestions, or questions on this document should be
addressed to the Commander, U.S. Army ARDEC, ATTN: AMSRD-AAR-QES-
E, Picatinny, NJ 07806-5000 or emailed to
ardecstdzn@conus.army.mil. Since contact information can change,
you may want to verify the currency of this address information
using the ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1320
DISTRIBUTION STATEMENT A.
Approved for public release;
distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business