INCH-POUND
MIL-DTL-60426B (AR)
21 June 2006
SUPERSEDING
MIL-B-60426A (MU)
16 January 1969
DETAILED SPECIFICATION
BURSTER, PROJECTILE - M54A1
This specification is approved for use by the U.S. Army Armament Research, Development and
Engineering Center (ARDEC), and is available for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers components, loading, assembling and packing of
the M54A1 projectile burster.
2. APPLICABLE DOCUMENTS.
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
assure the completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to the Commander,
U.S. Army ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, NJ 07806-5000 or emailed to
ardec-stdzn@pica.army.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC:1320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business