MIL-DTL-70438A(AR)
(Copies of these drawings may be requested online at
Drawing-Request@pica.army.mil or from U.S. Army ARDEC, ATTN:
AMSRD-AAR-AIS-TD, Picatinny, NJ 07806-5000.)
2.3 Non-Government Publications. The following documents
form a part of this document to the extent specified herein.
Unless otherwise specified, the issues of these documents are
those cited in the solicitation or contract.
ASTM INTERNATIONAL
ASTM D950 Standard Method of Test for Impact Strength
of Adhesive Bonds
(Copies of these documents are available online at
https://www.astm.org or from ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA 19428.)
2.4 Order of precedence. Unless otherwise noted herein or
in the contract, in the event of a conflict between the text of
this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however,
supersedes applicable laws and regulations unless a specific
exemption has been obtained.
3.
REQUIREMENTS
3.1 Required inspections.
3.1.1 First article. When specified (see 6.2), a sample
shall be subjected to first article inspection in accordance with
4.2.
3.1.2 Conformance. A sample shall be subjected to
conformance inspection in accordance with 4.3.
3.2 Components and assemblies. The components and
assemblies shall comply with all requirements specified on
drawing 9345325.
3.2.1 Plug, Universal. The materials, components and
assemblies shall be in accordance with dwg. 9347368.
3.2.2 Universal plug assembly (prior to pouring alloy). The
materials, components and assemblies shall be in accordance with
dwg. 9345325.
3.2.3 Universal plug assembly (after pouring alloy). The
materials, components and assemblies shall be in accordance with
dwg. 9345325.
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business