MIL-DTL-70438A(AR)
3.2.4 Ternary eutectic alloy. The materials, components and
assemblies shall be in accordance with dwg. 9215391.
3.2.5 Adhesive. The materials, components and assemblies
shall be in accordance with dwg. 9215393.
3.3 Ammunition lot numbering. Ammunition lot numbers shall
be assigned in accordance with MIL-STD-1168.
3.4 Tension. The plug shall sustain a load of 8000 pounds
minimum without any sign of failure.
3.5 Ductility. The Plug shall withstand permanent
deformation of the eye without cracking.
3.6 Fracture. The plug shall be free from porosity and
shrinks or discontinuous structure.
3.7 Workmanship. All parts shall be fabricated and finished
in a thorough, workmanlike manner. They shall be clean and free
of burrs, sharp edges, unblended radii, cracks, surface defects,
chips, dirt, grease, dust and other foreign matter. Where
cleaning and preparation are required by component details, the
finish specified shall apply to the indicated surfaces regardless
of contour configuration. The cleaning method used shall not be
injurious to any part nor shall the parts be contaminated by the
cleaning agent. All paint shall be dry to the touch before
packing for shipment. The paint shall be considered dry when the
soft tacky condition no longer exists and the paint feels firm
when touched with a finger using moderate pressure.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business