MIL-DTL-60377C (AR)
c. Foreign matter. No part or assembly shall contain
dirt, grease, chips, rust, corrosion or other foreign matter.
3.13.1 Rotating band. The land surfaces of the rotating
band shall comply with the following:
a. There shall be no raised brass.
b. There shall be no paint or foreign matter on the outer
diameter.
c. Nicks, gouges, scratches and other depressions on the
lands not exceeding 0.025 inches in depth are
acceptable.
d. Nicks, gouges, scratches and other depressions on the
lands with depths greater than 0.025 and less than or
equal to 0.050 inches are acceptable unless damage
extends longitudinally across more than half of the
land width.
e. There shall be no "washboard" or striated area that
extends longitudinally across more than half of the
land width if the depth exceeds 0.025 inches at any
point.
f. There shall be no nicks, gouges, scratches or other
depressions on the lands with depths greater than 0.050
inches.
3.14 Inspection lot formation. Lot formation shall be in
accordance with MIL-STD-1916.
10
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business