MIL-DTL
INCH-POUND
MIL-DTL-60584B (AR)
20 June, 2006
SUPERSEDING
MIL-P-60584A (AR)
7 MARCH 1984
DETAIL SPECIFICATION
PROJECTILE, 155 MILLIMETER - SMOKE, WP, METAL PARTS ASSEMBLY, M110A2
Reactivated after 20 June, 2006 and may be used for new and existing designs and
acquisitions
This specification is approved for use by the U.S. Army ARDEC, and is available for use
by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the manufacturing and assembly of the Projectile,
155MM, Smoke, WP, M110A2 Metal Parts. (See 6.1).
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are needed to meet the requirements
specified in sections 3 and 4 of this specification. This section does not include
documents in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to assure the
completeness of this list, document users are cautioned that they must meet all
requirements cited in sections 3 and 4 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to the
Commander, U.S. Army ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, NJ 07806-
5000 or emailed to ardec-stdzn@pica.army.mil. Since contact information can change, you may
want to verify the currency of this address information using the ASSIST Online database at
https://assist.daps.dla.mil.
AMSC N/A
FSC: 1320
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
1
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business