MIL-DTL-60585B (AR)
3.2.8 Ammunition lot numbering. Ammunition lot numbering shall be assigned in
accordance with drawing 10542950.
3.3 Brazed joint (alternative designs). The braze metal shall be visible for the full
360 degrees around the joint at the juncture of casing and rear of sleeve and also the
juncture of the casing and base plug, outside, if applicable.
3.3.1 Joint sections (alternative designs). When sectionalized, the braze metal
joint shall be free of voids, cracks, entrapped slag, cleaning or other fluid for an aggregate
of 85 percent of the exposed joint section.
3.4 Protective coating. The components and assemblies shall comply with all
requirements specified on Drawing 10542950.
3.4.1 Cleaning prior to protective coating. Prior to application of the protective
coating all surfaces of the burster case shall be thoroughly cleaned to remove all traces of
grit, oil, wax, grease, rust or other foreign matter.
3.4.2 Cleaning prior to testing. The burster casing, prior to hydrostatic and air
testing, shall be free from rust and other foreign matter in order no to clog passages and
possibly result in false non-leakers.
3.5 Metal defects. The burster case and burster case assembly shall be free from
cracks, splits, cold shuts, inclusions, porosity, laps, seams or other similar defects.
3.6 Burr. The burster case and burster case assembly shall contain no burr which
might interfere with assembly or function of the item or which might be injurious to
personnel handling the item.
3.7 Workmanship. All parts and assemblies shall be lubricated, loaded and
assembled in a thorough, skillful manner. Components shall be free of burrs, sharp edges,
cracks, dirt, grease, corrosion, and other foreign matter. Cleaning methods shall not be
injurious to any parts, nor shall the cleaning agents contaminate the parts. All required
marking and stamping shall be neat and sharply defined.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business